Release date: 2019-11-02 15:07 Views:
Technical parameters of UC-85 ultrasonic cleaning machine:
1. Input power: 220V 50Hz
2. Power consumption: ≤250W
3. Transducer: Piezo
Working principle and equipment composition:
1. The machine uses ultrasonic high-speed vibration to generate continuous impact vibration on the surface of the mold to be cleaned through the steel needle to achieve the purpose of cleaning the inner hole of the mold (in the ultrasonic cleaning process, the mold to be cleaned must be placed in water to complete the cleaning process).
2. This machine is mainly composed of three parts: ultrasonic generator, transducer and base.
1) .Ultrasonic generator: The ultrasonic generator is installed in a case, which is an ultrasonic power source. It uses automatic frequency tracking circuit to achieve the best ultrasonic output and vibration effect.
2). Transducer: The transducer is a high-efficiency piezoelectric ceramic transducer, which can convert ultrasonic waves into stable ultrasonic vibrations.
3). Base: There is a supporting plate which can be adjusted up and down on the pillar of the base, and the transducer is installed on this supporting plate.
Place the base on a stable table, adjust the transducer up and down to a suitable position, lock it, and connect the ultrasonic generator to the transducer with the output line that is randomly assigned, and then connect the power on the base The plug is inserted into the power output socket of the ultrasonic generator. After checking that the connection is correct, insert the power plug of the ultrasonic generator into a power outlet with a reliable grounding after the equipment switches are turned off.
Applicable cleaning range:
Suitable for cleaning natural diamond, polycrystalline diamond, artificial diamond, hard alloy (tungsten steel) and other wire drawing dies and tin plating dies with inner hole diameter of 0.01-15.00mm.